The StableLoad® suspension enhancement dramatically improves vehicle handling characteristics by "pre-activating" the stabilizing effect designed for rear springs by keeping them actively under load the way your vehicle factory engineers designed them to operate. It’s also the only suspension enhancement that you can turn on and off with the lower leaf spring design so you can return to your factory ride when not towing or hauling.
Once you begin to tow or haul with your truck, pressure is applied on the factory overload springs of your vehicle’s suspension. The leaf springs on your vehicle are designed as a spring pack with upper and lower overload leaf springs. When the vehicle is loaded the spring pack engages. The problem is that there isn’t enough stability to support the load, resulting in poor handling characteristics. Here’s just a few you may have experienced:
Side-to-Side Sway
Body Roll
Porpoising
Truck Sag
Features:
The StableLoad® is the only overload suspension system that follows the two major truck manufacturing laws of suspension: Law 1: Must be uncompromisingly comfortable as a passenger vehicle Law 2: Must ride safely without compromising comfort while towing and hauling
Dramatically improves safety, handling, body roll and porpoising while towing and hauling
Ability to turn on and off in seconds*
Universal fit for all vehicles with factory installed upper or lower overloads
Quad contact design complements the vehicle's specially engineered suspension that automotive manufacturers have invested millions of dollars designing, while all other rear suspension products reduce contact to only two points
Quick no-drill installation**
Enhances airbag performance by lowering airbag overload air pressure and activating the factory overloads
Kit includes four StableLoad® (outfits one complete vehicle)
Legendary Lifetime Warranty includes coverage for the vehicle factory leaf springs
Proudly made in the USA
* Applies only to the StableLoad® Quick Disconnect (Lower Overload).
** Does not apply to the StableLoad® Quick Disconnect (Lower Overload) A7311 (WITH DRILL KIT).
StableLoad® A7310/A7311/A7310S/A7311S require a minimum of 1-inch of clearance between the StableLoad and tire.
PATENT: Load Stabilizing devices sold under StableLoad® brand name are covered by one or more U.S. PATENTS and/or pending patent applications.
Due to varying suspension options not all vehicle models come equipped with factory overloads.
Before ordering your StableLoad®, please first verify that your vehicle came equipped with factory overloads, and what type of overload (upper overload or lower overload) your vehicle is equipped with.